Skip to content Skip to navigation menu
  • Load capacity per cabinet 30 kg (tested according to standard DIN EN 15939)
  • Variable side adjustments

  • Recommended fixing:
    Four screw fixing for cabinet suspension per m2 cabinet floor area
  • Maximum cabinet depth of 400 mm
Suspension rail without slip off protection; on adjusting the position of the wall unit it may slip off the suspension rail and fall!
Information on load capacity of cabinet suspension brackets and on accessories.
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:
  • Both the furniture design and the quality of the furniture's materialand production are beyond our control.
  • The quality and condition of wall materials are also beyond ourcontrol.
  • The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
  • Commercial type special mounting elements must be used for attachment to other wall materials.
  • Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
  • Mounting suspension rails:
    - with 2 special screws, ø 5.5 x 50 mm, at the level of each cabinet suspension bracket
    - from a cabinet body width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each cabinet body
    - Please note that the cupboard hangers must be mounted above the wall fixing screw (max. 20 mm offset)
  • Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
Flip page catalogue
Overview table
Dimensions
76 x 47,5 x 2 mm 2000 x 40 x 1,2 mm 2000 x 29 x 6,5 x 2 mm 130 x 36 x 7 x 2 mm 1000 x 40 x 1,2 mm 1000 x 29 x 6,5 x 2 mm
Load capacity kg
30 kg
Finish / colour
galvanised
Packaging
1 pc. / loose
Order no.
9149710
Product details
Technical details
Dimensions 2000 x 40 x 1,2 mm
Load capacity kg 30 kg
Finish / colour galvanised
Height 1,2
Width 40
Length 2000
Material thickness 1,2
Including fixing material no
Order no. 9149710
EAN 4008057012614
Article Suspension rails for cabinet suspension bracket, 2000 x 40 x 1,2 mm, steel, galvanised
PU 1 ea.
Content structure PU -
Material steel
Herstelleradresse
Hettich Do-It-Yourself GmbH & Co. KG
Lange Str. 51
49326 Melle
Germany
diy(at)hettich.com
www.hettich-diy.com
Essential accessories
Optional accessories
Assembly aids
Planning / CAD
Realization & assembly

Installation instructions & Processing information

Catalogue Information

Loading... Please wait...