Ignorer contenu Passer au menu de navigation
  • Load capacity per cabinet 150 kg (tested according to standard DIN EN 15939)
  • Variable side adjustments

  • Recommended fixing:
    Four screw fixing for cabinet suspension per m2 cabinet floor area
  • Maximum cabinet depth of 400 mm
Suspension rail without slip off protection; on adjusting the position of the wall unit it may slip off the suspension rail and fall!
Information on load capacity of cabinet suspension brackets and on accessories.
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:
  • Both the furniture design and the quality of the furniture's materialand production are beyond our control.
  • The quality and condition of wall materials are also beyond ourcontrol.
  • The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
  • Commercial type special mounting elements must be used for attachment to other wall materials.
  • Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
  • Do not use cut screw holes
  • Mounting suspension rails:
    - with 2 special screws, ø 5.5 x 50 mm, at the level of each cabinet suspension bracket
    - from a cabinet body width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each cabinet body
    - Please note that the cupboard hangers must be mounted above the wall fixing screw (max. 20 mm offset)
  • Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
  • A spacer strip must be fitted to the underside of the wall unit for vertical alignment.
    The thickness of the moulding may vary depending on the condition of the wall.
Vue d'ensemble
Abmessungen
76 x 47,5 x 2 mm 2000 x 40 x 1,2 mm 2000 x 29 x 6,5 x 2 mm 130 x 36 x 7 x 2 mm 1000 x 40 x 1,2 mm 1000 x 29 x 6,5 x 2 mm
Belastbarkeit kg
150 kg
Oberfläche / Farbe
verzinkt
Verpackung
1 St. / lose
Bestell-Nr.
5510
Détails des produits
Détails techniques
Dimensions 2000 x 29 x 6,5 x 2 mm
Capacité de charge kg 150 kg
Surface / Couleur zingué
Largeur 29
Longueur 2000
Profondeur 6,5
Épaisseur de matériau 2
Y compris accessoires de fixation Non
Référence 5510
EAN 4008057055109
Type de l'article Rail suspension meuble, 2000 x 29 x 6,5 x 2 mm, Acier, zingué
UV 1 ea.
Structure du contenu UE -
Matériau Acier
Herstelleradresse
Hettich Do-It-Yourself GmbH & Co. KG
Lange Str. 51
49326 Melle
Germany
diy(at)hettich.com
www.hettich-diy.com
Accessoire obligatoire
Accessoires en option
Aides à l’usinage
Planification / CAD
Réalisation & montage

Instructions de montage & informations pour le traitement

Chargement en cours... Veuillez patienter...