Skip to content Skip to navigation menu
  • Load per unit with two rails 130 kg
  • Variable side adjustments
Suspension rail without slip off protection; on adjusting the position of the wall unit it may slip off the suspension rail and fall!
Information on load capacity of cabinet suspension brackets and on accessories.
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:
  • Both the furniture design and the quality of the furniture's materialand production are beyond our control.
  • The quality and condition of wall materials are also beyond ourcontrol.
  • The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
  • Commercial type special mounting elements must be used for attachment to other wall materials.
  • Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
  • Mounting suspension rails:
    - with 2 special screws, ø 5.5 x 50 mm, at the level of each cabinet suspension bracket
    - from a cabinet body width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each cabinet body.
  • Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
  • A spacer strip must be fitted to the underside of the wall unit for vertical alignment.
    The thickness of the moulding may vary depending on the condition of the wall.
Flip page catalogue
Overview table
Dimensions
76 x 47,5 x 2 mm 2000 x 40 x 1,2 mm 2000 x 29 x 6,5 x 2 mm 130 x 36 x 7 x 2 mm 1000 x 40 x 1,2 mm 1000 x 29 x 6,5 x 2 mm
Load capacity kg
130 kg
Finish / colour
galvanised
Packaging
50 x 1 pcs. / polythene bag with label 25 x 1 pcs. / polythene bag with label 2 pcs. / blister box 10 pcs. / blister box 1/50 pcs. / polythene bag with label 1 pc. / loose
Order no.
9247710
Product details
Technical details
Dimensions 76 x 47,5 x 2 mm
Load capacity kg 130 kg
Finish / colour galvanised
Width 47,5
Length 76
Material thickness 2
Including fixing material no
Order no. 9247710
EAN 4008057954532
Article Cupboard suspension fitting, 76 x 47,5 x 2 mm, steel, galvanised
PU 25 ea.
Content structure PU 25 x 1
Material steel
Herstelleradresse
Hettich Do-It-Yourself GmbH & Co. KG
Lange Str. 51
49326 Melle
Germany
diy(at)hettich.com
www.hettich-diy.com
Essential accessories
Optional accessories
Assembly aids
Planning / CAD
Realization & assembly

Installation instructions & Processing information

Catalogue Information

Loading... Please wait...