Skip to content Skip to navigation menu
  • For right and left assembly
  • Recessed installation
  • Cup diameter 30 mm
  • Depth 12 mm
  • Load capacity per piece: 15 kg
  • Complete with mounting hardware
Information on load capacity of cabinet suspension brackets and on accessories.
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:
  • Both the furniture design and the quality of the furniture's materialand production are beyond our control.
  • The quality and condition of wall materials are also beyond ourcontrol.
  • The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
  • Commercial type special mounting elements must be used for attachment to other wall materials.
  • Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
  • Mounting suspension rails:
    - with 2 special screws, ø 5.5 x 50 mm, at the level of each cabinet suspension bracket
    - from a cabinet body width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each cabinet body.
  • Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
Flip page catalogue
Overview table
Article type DIY
Screw in hook with wall plug Cabinet suspension brackets with screw in hook and wall plug Cabinet suspension brackets
Packaging
2 pcs. / blister box
Order no.
9100053
Product details
Technical details
Height 12
Dimensions Ø 30 x 12 mm
Diameter 30 mm
Mounting side left or right
Load capacity kg 15 kg
Including fixing material Yes
Order no. 9100053
EAN 4008057897068
Article Cabinet suspension brackets with screw in hook and wall plug, Ø 30 x 12 mm, die-cast zinc, nickel plated, white
PU 2 ea.
Content structure PU -
Material die-cast zinc
Finish / colour nickel plated, white
Herstelleradresse
Hettich Do-It-Yourself GmbH & Co. KG
Lange Str. 51
49326 Melle
Germany
diy(at)hettich.com
www.hettich-diy.com
Essential accessories
Optional accessories
Assembly aids
Planning / CAD
Realization & assembly

Installation instructions & Processing information

Catalogue Information

Loading... Please wait...